LT3743
APPLICATIONS INFORMATION
2V
MOSFET Selection for the Switched Output Capacitors
The MOSFETs used for the switched-output capacitor need
to also handle the maximum regulated current while the
capacitor is charged. The output drivers on the PWMGH
and PWMGL pins have a pull-up impedance of 3.2Ω and
a pull-down impedance of 1.75Ω. This provides adequate
gate drive for the PWM MOSFETs without the need for an
additional gate driver. If the LED forward resistance and
the difference between the two regulated currents is large
enough, then two MOSFETs are required to prevent the body
diode of the MOSFET from conducting and discharging
the capacitor for the high current state. Figure 9 shows
the output capacitor for the high current regulation state
discharged with the body diode when a single MOSFET
is used. Figure 10 shows the application circuit with a
drain-to-drain configuration for the high current output
capacitor. In this configuration, the body diode of the up-
per MOSFET blocks conduction and prevents discharge
of the high current output capacitor.
I CTRL_L = 1A
I CTRL_H = 20A
If the voltage between the low state and the high state is
very large (greater than the threshold of the MOSFET) then
the capacitor may once again be discharged. To account for
this, choose a MOSFET that has a threshold greater than
the voltage difference. If the voltage difference exceeds
1.5V, use the circuit shown in Figure 11. The circuit shown
will keep the capacitor from discharging to a voltage dif-
ference of approximately 2V + V TH .
I CTRL_L = 1A
I CTRL_H = 20A
V F = 3V
R D = 200m
PWMGH
LT3743
PWMGL
V CC_INT
3.01k
2k
3743 F11
PWMGH
0V
3.8V
3.04V
V F = 3V
R D = 40m
Figure 11. Application for Large Differences
in Regulated Currents
LT3743
V F = 3V
R D = 40m
= HIGH
OFF
5V
PWMGL
ON
3743 F09
Figure 9. Body Diode of High Current FET
Discharges the Output Capacitor
I CTRL_L = 1A
I CTRL_H = 20A
3.8V 3.04V
PWMGH
LT3743
PWMGL
3743 F10
Figure 10. With a Drain-to-Drain Configuration, the Body
Diode of the Top FET Blocks the Current Path That Would
Discharge the High Current Output Capacitor
Board and Interconnect Inductance
The board and interconnect inductance from the output
capacitors to the load also determine the rate of change
in load (LED) current. The rate of change in load current
will be:
dI L V   – V LOW
dt L BOARD
where dI L /dt is the rate of change in the load current,
V HIGH is the output voltage when the inductor is regulated
at the high level, and V LOW is the output voltage when the
inductor is regulated at the low state. When measuring the
LED current do not use a current probe. The core material
used in most probes adds inductance and slows the rise
time of the LED current. Instead, when measuring the
current, use a sense resistor.
3743fd
17
相关PDF资料
LT3745IUJ#TRPBF IC LED DVR 16CH 50MA 40QFN
LT3746IUHH#TRPBF IC LED DRIVER 32CHANNEL 56-QFN
LT3754IUH#TRPBF IC LED DVR 16CH 50MA 32QFN
LT3755EMSE#PBF IC LED DRVR HP CONS CURR 16-MSOP
LT3760EFE#PBF IC LED DVR WHT/CLR BCKLT 28TSSOP
LT3799IMSE#PBF IC LED DRIVER TRIAC DIM 16-MSOP
LT3956EUHE#PBF IC LED DVR BUCK BOOST 36-VQFN
LTC3201EMS#TRPBF IC LED DRVR WHITE BCKLGT 10-MSOP
相关代理商/技术参数
LT3743EFE#PBF 制造商:Linear Technology 功能描述:IC LED DRIVER BUCK TSSOP-28
LT3743EFE#TRPBF 功能描述:IC LED DVR SYNC STEPDOWN 28TSSOP RoHS:是 类别:集成电路 (IC) >> PMIC - LED 驱动器 系列:- 标准包装:6,000 系列:- 恒定电流:- 恒定电压:- 拓扑:开路漏极,PWM 输出数:4 内部驱动器:是 类型 - 主要:LED 闪烁器 类型 - 次要:- 频率:400kHz 电源电压:2.3 V ~ 5.5 V 输出电压:- 安装类型:表面贴装 封装/外壳:8-VFDFN 裸露焊盘 供应商设备封装:8-HVSON 包装:带卷 (TR) 工作温度:-40°C ~ 85°C 其它名称:935286881118PCA9553TK/02-TPCA9553TK/02-T-ND
LT3743EFEPBF 制造商:LINER 制造商全称:Linear Technology 功能描述:High Current Synchronous Step-Down LED Driver with Three-State Control
LT3743EFETRPBF 制造商:LINER 制造商全称:Linear Technology 功能描述:High Current Synchronous Step-Down LED Driver with Three-State Control
LT3743EUFD#PBF 功能描述:IC LED DRVR HP CONST CURR 28QFN RoHS:是 类别:集成电路 (IC) >> PMIC - LED 驱动器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 恒定电流:- 恒定电压:- 拓扑:升压(升压),切换式电容器(充电泵) 输出数:1 内部驱动器:是 类型 - 主要:背光 类型 - 次要:白色 LED 频率:625kHz ~ 875kHz 电源电压:2.7 V ~ 5.3 V 输出电压:5V 安装类型:表面贴装 封装/外壳:10-TFSOP,10-MSOP(0.118",3.00mm 宽) 供应商设备封装:10-µMAX 包装:带卷 (TR) 工作温度:-40°C ~ 85°C
LT3743EUFD#PBF 制造商:Linear Technology 功能描述:IC LED DRIVER BUCK QFN-28 制造商:Linear Technology 功能描述:IC, LED DRIVER, BUCK, QFN-28
LT3743EUFD#TRPBF 功能描述:IC LED DVR SYNC STEP-DOWN 28QFN RoHS:是 类别:集成电路 (IC) >> PMIC - LED 驱动器 系列:- 标准包装:6,000 系列:- 恒定电流:- 恒定电压:- 拓扑:开路漏极,PWM 输出数:4 内部驱动器:是 类型 - 主要:LED 闪烁器 类型 - 次要:- 频率:400kHz 电源电压:2.3 V ~ 5.5 V 输出电压:- 安装类型:表面贴装 封装/外壳:8-VFDFN 裸露焊盘 供应商设备封装:8-HVSON 包装:带卷 (TR) 工作温度:-40°C ~ 85°C 其它名称:935286881118PCA9553TK/02-TPCA9553TK/02-T-ND
LT3743EUFDPBF 制造商:LINER 制造商全称:Linear Technology 功能描述:High Current Synchronous Step-Down LED Driver with Three-State Control